Robot Vacuum Cleaner Manufacturer in China — OEM Robot Vacuum Cleaner Factory

Guilin Prime Household Products Co., Ltd. (brand Prime Household) is a manufacturer and trading company supplying robot vacuum cleaners from China. We build laser-navigation and gyroscopic sweep-vacuum-mop robots up to 20,000Pa with app control, auto-charging and auto dust collection, and we consolidate them with the rest of a buyer’s home range under one order and one set of commercial terms.

Building a robot vacuum range that actually sells

Robot vacuums are a tiered category. Buyers who stock a single model almost always pick the wrong one — too expensive to move volume, or too basic to protect a review score. A range that works usually has three points in it.

The entry model

A random-navigation robot at roughly 1,000Pa to 1,499Pa, with about 60 minutes of runtime and a 285ml dustbin. It exists to hit a price and to convert first-time buyers who are not yet sure they want a robot at all. Specified honestly and reviewed as an entry product, it performs its job.

The volume model

A gyroscopic machine that cleans in structured rows rather than randomly. This is where most of the units go in most markets, because the improvement in coverage over random navigation is obvious to the end user while the price increase is modest. A 3-in-1 sweep-vacuum-mop build at this tier is the single most saleable configuration we produce.

The halo model

A laser-navigation robot at up to 20,000Pa with app control, route planning, no-go zones, auto-charging and a 4L auto dust-collection base. It carries the range’s credibility, supports a premium price, and gives your listing something to compare against the entry model. Batteries at this tier run to around 3,000mAh.

Why three tiers rather than one

The entry model brings people in, the gyro model takes the volume, and the laser model makes both look considered. Stocking only the top of the range leaves money on the table; stocking only the bottom caps your review scores.

What we manufacture and what we consolidate

Prime Household is a manufacturer and a trading company, and we say which is which on any given line rather than blurring it.

Manufacturing

Robot chassis and housing components are produced on our own tooling in Guilin, Guangxi, with in-house assembly and test. That is what allows genuine private-label differentiation — a distinct chassis and finish rather than a badge on a shell that thirty other brands also sell.

Consolidation

Buyers stocking robots normally want the rest of a home range with them. Rather than making you run several supplier relationships and several shipments, we bring those lines into one order, one QC standard and one set of terms. For a buyer building or refreshing a range, that is usually what decides whether a launch lands this season.

Why we are explicit about it

A great many suppliers in this category describe themselves as a factory while reselling someone else’s production. You need to know which is which to judge lead time, quality control and where price can genuinely move — so we tell you. We are not a sourcing agent.

Specification, testing and compliance

A robot vacuum is a battery, a radio, a motor and a software stack in one housing, which makes it one of the more demanding products in a home range to get right.

What we test

Navigation is tested against a real floor plan with furniture rather than an empty square, because that is where random and structured patterns diverge. Beyond that: docking and auto-charging reliability, battery charge and discharge cycling, suction measured at the floor-head, water-tank sealing on mopping builds, and anti-drop sensor response at a step edge. App-controlled models are tested for pairing, map handling and scheduling — a robot that cleans well but will not connect earns the same one-star review as one that does not clean.

Battery, and the month-ten problem

Most bad robot-vacuum reviews are written months after purchase, when runtime has fallen. Cycle testing matters more than headline capacity, and it is worth asking any supplier what they have actually run rather than only what the cell is rated at. Capacities across our range run from about 1,500mAh and 2,600mAh to 3,000mAh.

Certification

CE, RoHS, UL, ETL, FDA, FCC, ISO 9001, BSCI, UKCA, EAC and KC are available across the range, with more on request. Because these machines carry a battery and a radio, the certificate set is larger than for a simple appliance — and not every model holds every mark. We match the set to the specific models and destination market, and ship the test reports with the order.

OEM, ODM and private-label programmes

Most of the robots we ship carry a customer’s brand rather than ours.

What you can specify

Chassis colour and finish, branding on unit, dock and packaging, navigation tier, suction and battery specification, 2-in-1 or 3-in-1 configuration, remote or app control, dock type including the auto-empty base, plug and cord set for your market, and the full documentation and carton artwork set. App branding is available as part of an ODM programme.

Start from a platform

Robot vacuums carry more tooling and firmware cost than almost any other small appliance, so funding a chassis and a navigation stack from zero rarely pays back on a first order. Starting from a proven platform and changing specification, finish, configuration and packaging gets a differentiated range to market at a fraction of the cost and risk.

What to send us for a quote

Navigation tier, the suction and runtime you intend to advertise, 2-in-1 or 3-in-1, whether you want an auto-empty dock, destination market and quantity. We quote against a real bill of materials, and where a cheaper build is possible we will tell you what it costs you rather than quietly substituting it.

Questions worth asking before you order

Software makes it unusually easy to disguise hardware in this category. These questions cut through it.

“Random, gyro or laser?”

“Smart navigation” is not an answer. The three behave completely differently on a real floor plan, and the difference is what your reviews will be about.

“Where is the suction measured?”

At the motor or at the floor-head. These produce very different numbers for the same machine, and only one of them describes what the end user experiences.

“Whose app is it?”

A generic white-label app shared across many brands has real consequences for your support load and your data position. Establish it before the order.

“What cycle testing has the battery had?”

This is the question that predicts your month-ten review score, and it is the one most rarely asked.

“What is the certificate set for my market?”

Battery plus radio plus motor means more marks than a simple appliance. Ask for the set that covers the exact models you are importing.

Certifications and compliance

Compliance is where a cheap order stalls at customs. Across our range we manufacture robot vacuum cleaners to the international marks below, with custom certifications on request — not every model holds every mark, so we match the certificate set to your destination market.

For every order we supply the matching certificates and test reports your customs broker and retail channel require, so the shipment clears and lands without a paperwork stall.

Commercial terms

The terms behind an order are built for a straightforward first purchase and a repeatable re-order.

Other product lines we manufacture

Prime Household is a multi-category OEM factory. Sourcing more than one product line? Consolidate it under one supplier, one set of terms and one QC standard:

• Household appliance manufacturer in China (hub)
• Air Fryer manufacturer in China
• Vacuum Cleaner manufacturer in China
• Steam Cleaner manufacturer in China
• Cold Press Juicer manufacturer in China
• Garment Steamer manufacturer in China
• Toaster manufacturer in China
• Floor Scrubber manufacturer in China
• Kitchen Food Waste Disposer manufacturer in China

Frequently asked questions

Are you a manufacturer or a trading company?

Both, and we are explicit about which applies to each line. Guilin Prime Household Products Co., Ltd. manufactures robot vacuums on our own tooling in Guilin, Guangxi, and also acts as a trading company to consolidate other home lines into the same order. We are not a sourcing agent.

What navigation options do you offer?

Random navigation at the entry tier, gyroscopic navigation as the volume seller, and laser navigation with app control, route planning, no-go zones and auto-charging at the premium tier. We usually recommend carrying three tiers rather than one.

How much suction do your robots have?

From around 1,000Pa at the entry point up to 20,000Pa on laser-navigation models. Higher suction reduces runtime and increases noise, so the right figure depends on the floor types in your market rather than on the maximum available.

Do the robots mop?

Yes. We build 2-in-1 sweeping and vacuuming models and 3-in-1 sweep-vacuum-mop models with a water tank and mop plate. The 3-in-1 gyroscopic build is the single most saleable configuration in most markets.

Do you offer an auto-empty dust station?

Yes, on the top tier: an auto dust-collection base with a 4L bag, so the user empties the machine every few weeks instead of after every clean. It is one of the strongest upgrade drivers and supports a premium price point.

What is the MOQ and lead time?

From 100 units per model, lower on selected items, OEM and private-label included. Lead time is 15 to 30 days from a confirmed order and deposit, depending on volume and customisation.

Can you consolidate robots with other product lines in one shipment?

Yes. That is a large part of why buyers work with us: robots plus the rest of a home range under one order, one QC standard, one set of commercial terms and one shipment rather than several supplier relationships.